Xbox 360 Wifi Adapter Official, Need Help

[Zodiark]

I connected my Xbox 360 Wifi Adapter into the back of my Xbox 360.

When it was connected it would just flash green and do nothing. What do I have to do?

[Løki]

One of the cords is set wrong.
Set the HDMI cord I believe to the lower setting. There is a switch on it that needs to be flipped.

[Solariphus]

Um, no actually. That has nothing to do with the adapter Loki...
Do you have the one actually made by Microsoft? If so, you should have to plug it into both the rear USB and the ethernet if memory serves... If you have a different model of adapter it will hook up differently, usually to the ethernet port on the console and to an external power source. Once it's physically plugged in, you need to go into the settings tab and look for network settings. In there, select the area that says something along the lines of:
Network SSID
Network Enxryption Type
Network Status
Once you're in there tell it to search for available wireless networks, select your own, then enter any needed passwords.
Barring any problems with you network denying access, that should be everything you need to do to get it up and running. Good luck!

[seabeast]

There isn't an ethernet cord on the adapter. Only USB.

[Zodiark]

Can someone just post a tut on how to get it all to work. Like I have been reading how to install it and I am just confused. What do I do with the disk it came with?

[Mota-Lev]

Long Blue Cables FTW!!

[Kiyoshi]

Uh...my bro's didn't come with a CD...you plug it into the back of the system and find your internet through the network settings i think..

[seabeast]

Connecting the adapter to the Xbox 360

Configuring to allow connecting to the internet (On a different site. Xbox.com doesn't have instructions for this.)

Other Miscellaneous stuff

[Zodiark]

I figured it out!

I had to install the CD first.

Thanks for everyones help!