No, you're just an all-round failing noob.Supermega wrote:Oi! i may be a failing n00b at modding but i'll cap yo ass when it comes to airsoft.
Airsoft CQB loadout
Re: Airsoft CQB loadout
Re: Airsoft CQB loadout
At least I have a fan 

ᕦ( ͡°╭͜ʖ╮͡° )ᕤ
Visiting this website is filled with nostalgia. Its like going to an old home.
Thank you for all the memories. Never change.
Visiting this website is filled with nostalgia. Its like going to an old home.
Thank you for all the memories. Never change.
Re: Airsoft CQB loadout
HEY , every one of you started out as failing noobs and learnt from experience and experimenting. You are only more legendary because you didnt have all the tools (which make modding a lot easier) at the time. 
where i go its all woodland with one CQ building . We have a magazine called Airsoft International, and it featured a really fun looking CQ site near washington D.C, or baltimore cant remember, have you ever been there?

where i go its all woodland with one CQ building . We have a magazine called Airsoft International, and it featured a really fun looking CQ site near washington D.C, or baltimore cant remember, have you ever been there?
Life is like a box of chocolates, to bloody expensive and whats left at the end is shite
-
- Ranger
- Posts: 1806
- Joined: Mon May 05, 2008 3:21 pm
- Location: ~root@208.113.172.130# sudo rm -f /
Re: Airsoft CQB loadout
/Derailed thread.
Not necessarily.
Also, just because some of you are noobs doesn't mean you have to prove it.
For example myself, I had a friend in my clan who would do little bits and pieces of modding, and he knew Mr. Mods so when i created a few random mods, one would crash off and on I think was the issue, and he asked modzy to fix it. Modzy directed me to here, I made a post, was told to read, I read, when I didn't understand something, I asked modzy, he helped me understand, and then bamf, I released like one mod beta, Storm Valley, and then every mod I've created since has been either helping someone else, or for my own personal use between a few friends.
I do wish I had released a couple back when I had them though, I had perfected a number of things way back when, and several of my mods were very fun.
The annihilation was my last mod I created, and just when I was about to release it, I had to reformat my hard-drive, and I didn't have a way to back it up at the time. So alas, it is gone, along with all my other mods.
All that to say, that just because you're a noob, does NOT mean you have to post and show it. If you can't figure it out, THEN ask a question, Ya'll nowadays are idiots, bitches, dicks, and assholes, with no appreciation for anything anymore. You're only here to flame each other and get to another day so you can do it again, fucking faggots.
NOW SHUT THE FUCK UP AND GET BACK ON TOPIC
/Re-Railed
I ordered one of these, they have to ship it from hong kong, so I have no idea when i'll get it, but damn, I can't wait.
I love Tokyo Marui's, and the FiveseveN compliments my p90 nicely.
http://www.airsoftpost.com/product_info ... s_id=32147

And the next weapon I purchase later on, when i start getting into large scale and mil-sim operations:
http://www.airsoftpost.com/product_info ... s_id=31750

Although I'd probably install my own flash-hider mock suppressor, a different EO-Tech optic, and idk, might keep the EGLM for looks, but I probably wouldn't use it much.
The gas blowback on the SCAR is amazingly realistic
But, i'd custom paint my SCAR to an OD fern pattern.
Nope, I've never been farther east than arizona. Got a link to the site of the fields you run at?
Not necessarily.
Also, just because some of you are noobs doesn't mean you have to prove it.
For example myself, I had a friend in my clan who would do little bits and pieces of modding, and he knew Mr. Mods so when i created a few random mods, one would crash off and on I think was the issue, and he asked modzy to fix it. Modzy directed me to here, I made a post, was told to read, I read, when I didn't understand something, I asked modzy, he helped me understand, and then bamf, I released like one mod beta, Storm Valley, and then every mod I've created since has been either helping someone else, or for my own personal use between a few friends.
I do wish I had released a couple back when I had them though, I had perfected a number of things way back when, and several of my mods were very fun.
The annihilation was my last mod I created, and just when I was about to release it, I had to reformat my hard-drive, and I didn't have a way to back it up at the time. So alas, it is gone, along with all my other mods.
All that to say, that just because you're a noob, does NOT mean you have to post and show it. If you can't figure it out, THEN ask a question, Ya'll nowadays are idiots, bitches, dicks, and assholes, with no appreciation for anything anymore. You're only here to flame each other and get to another day so you can do it again, fucking faggots.
NOW SHUT THE FUCK UP AND GET BACK ON TOPIC
/Re-Railed
I ordered one of these, they have to ship it from hong kong, so I have no idea when i'll get it, but damn, I can't wait.

I love Tokyo Marui's, and the FiveseveN compliments my p90 nicely.
http://www.airsoftpost.com/product_info ... s_id=32147

And the next weapon I purchase later on, when i start getting into large scale and mil-sim operations:
http://www.airsoftpost.com/product_info ... s_id=31750

Although I'd probably install my own flash-hider mock suppressor, a different EO-Tech optic, and idk, might keep the EGLM for looks, but I probably wouldn't use it much.
The gas blowback on the SCAR is amazingly realistic

But, i'd custom paint my SCAR to an OD fern pattern.
Nope, I've never been farther east than arizona. Got a link to the site of the fields you run at?
~ Teh Slapz

TaxiService wrote:OMG BARREL ROLL ON ACIDS
._. \·. |: /.· .-. ·.\.·/ ._. \·. |: /.· .-. ·.\
.·/ ._.
WHOOHHAGHGHHGEHGR
Re: Airsoft CQB loadout
Does CQB mean close quarter battle?
ᕦ( ͡°╭͜ʖ╮͡° )ᕤ
Visiting this website is filled with nostalgia. Its like going to an old home.
Thank you for all the memories. Never change.
Visiting this website is filled with nostalgia. Its like going to an old home.
Thank you for all the memories. Never change.
-
- Ranger
- Posts: 1806
- Joined: Mon May 05, 2008 3:21 pm
- Location: ~root@208.113.172.130# sudo rm -f /
Re: Airsoft CQB loadout
Yes, aka: CQC "Close Quarter Combat"
~ Teh Slapz

TaxiService wrote:OMG BARREL ROLL ON ACIDS
._. \·. |: /.· .-. ·.\.·/ ._. \·. |: /.· .-. ·.\
.·/ ._.
WHOOHHAGHGHHGEHGR
Re: Airsoft CQB loadout
That SCAR is nice, but the ELGM makes the clip seem way too small when it's loaded, I'd never put that on my wooden rifle.
Besides, I'm using mine as a DMR. I'll paint her in a digital camo by using some masking tape and a couple shades of grey. I'd start doing Airsoft if my parents would let me. >_>
Besides, I'm using mine as a DMR. I'll paint her in a digital camo by using some masking tape and a couple shades of grey. I'd start doing Airsoft if my parents would let me. >_>
Re: Airsoft CQB loadout
That second gun looks Like it will hurt and looks awesome. and what's that on the bottom? Is that *gasp* a noob tube? It may also be a flashlight or dot? Cuz in paintball, we have paint grenades. They have a timer and just spray paint EVERYWHERE within like a meter radius. Does it do that with bee bees also? (airsofts shoot bee bees right?)
ᕦ( ͡°╭͜ʖ╮͡° )ᕤ
Visiting this website is filled with nostalgia. Its like going to an old home.
Thank you for all the memories. Never change.
Visiting this website is filled with nostalgia. Its like going to an old home.
Thank you for all the memories. Never change.
Re: Airsoft CQB loadout
Airsoft shoots 6-8mm plastic bb's, yes.
That is indeed a grenade launcher.
Airsoft has various types of grenades, we have standard flashbangs, that you fill with CO2 or green gas, and talcum powder, to well, simulate a flashbang, we also have bb grenades that "detonate" after a set period of time, which shoots bb's at a high velocity in a 360• radius, and we have what we call "shower grenades" they are what you would put in the grenade launcher. These you load with anywhere from 30-500 bb's, and when you "launch" it, it sprays all of the bb's out in the aimed direction, at high speed all at once, usually through anywhere from 8-32 "barrels" on the grenade. Immagine getting hit with 500 bb's at close range all at once... Ouch..
The pistol hurts just as bad as that SCAR, well, almost, they are both gas powered guns, the rifle just has a longer barrel and a few accessories, and a higher fps.
I'd replace the ELGM with an M203, or just remove it.
That is indeed a grenade launcher.
Airsoft has various types of grenades, we have standard flashbangs, that you fill with CO2 or green gas, and talcum powder, to well, simulate a flashbang, we also have bb grenades that "detonate" after a set period of time, which shoots bb's at a high velocity in a 360• radius, and we have what we call "shower grenades" they are what you would put in the grenade launcher. These you load with anywhere from 30-500 bb's, and when you "launch" it, it sprays all of the bb's out in the aimed direction, at high speed all at once, usually through anywhere from 8-32 "barrels" on the grenade. Immagine getting hit with 500 bb's at close range all at once... Ouch..
The pistol hurts just as bad as that SCAR, well, almost, they are both gas powered guns, the rifle just has a longer barrel and a few accessories, and a higher fps.
I'd replace the ELGM with an M203, or just remove it.
Re: Airsoft CQB loadout
Shouldnt you mean ROF? Or sps? frames per second doesn't really fit...Slappey wrote:Airsoft shoots 6-8mm plastic bb's, yes.
That is indeed a grenade launcher.
Airsoft has various types of grenades, we have standard flashbangs, that you fill with CO2 or green gas, and talcum powder, to well, simulate a flashbang, we also have bb grenades that "detonate" after a set period of time, which shoots bb's at a high velocity in a 360• radius, and we have what we call "shower grenades" they are what you would put in the grenade launcher. These you load with anywhere from 30-500 bb's, and when you "launch" it, it sprays all of the bb's out in the aimed direction, at high speed all at once, usually through anywhere from 8-32 "barrels" on the grenade. Immagine getting hit with 500 bb's at close range all at once... Ouch..
The pistol hurts just as bad as that SCAR, well, almost, they are both gas powered guns, the rifle just has a longer barrel and a few accessories, and a higher fps.
I'd replace the ELGM with an M203, or just remove it.
ᕦ( ͡°╭͜ʖ╮͡° )ᕤ
Visiting this website is filled with nostalgia. Its like going to an old home.
Thank you for all the memories. Never change.
Visiting this website is filled with nostalgia. Its like going to an old home.
Thank you for all the memories. Never change.
-
- Ranger
- Posts: 1806
- Joined: Mon May 05, 2008 3:21 pm
- Location: ~root@208.113.172.130# sudo rm -f /
Re: Airsoft CQB loadout
If you don't know the fuck you're talking about, stay out of the conversation.Fortune wrote:Shouldnt you mean ROF? Or sps? frames per second doesn't really fit...Slappey wrote:Airsoft shoots 6-8mm plastic bb's, yes.
That is indeed a grenade launcher.
Airsoft has various types of grenades, we have standard flashbangs, that you fill with CO2 or green gas, and talcum powder, to well, simulate a flashbang, we also have bb grenades that "detonate" after a set period of time, which shoots bb's at a high velocity in a 360• radius, and we have what we call "shower grenades" they are what you would put in the grenade launcher. These you load with anywhere from 30-500 bb's, and when you "launch" it, it sprays all of the bb's out in the aimed direction, at high speed all at once, usually through anywhere from 8-32 "barrels" on the grenade. Immagine getting hit with 500 bb's at close range all at once... Ouch..
The pistol hurts just as bad as that SCAR, well, almost, they are both gas powered guns, the rifle just has a longer barrel and a few accessories, and a higher fps.
I'd replace the ELGM with an M203, or just remove it.
Feet Per Second, measured by a chronograph, usually chronoed with .20 gram bb's under 1 Joule of muzzle energy.
Rate Of Fire, was not even brought up.
My p90 shoots about 300 rounds per minute though, 1/3 of the real steel's 900 per minute.
~ Teh Slapz

TaxiService wrote:OMG BARREL ROLL ON ACIDS
._. \·. |: /.· .-. ·.\.·/ ._. \·. |: /.· .-. ·.\
.·/ ._.
WHOOHHAGHGHHGEHGR
Re: Airsoft CQB loadout
What we really need are 900 round magazines. Then you could fire for a minute before reloading. 

-
- Ranger
- Posts: 1806
- Joined: Mon May 05, 2008 3:21 pm
- Location: ~root@208.113.172.130# sudo rm -f /
Re: Airsoft CQB loadout
May I present to you, something even better:
A 1500 round "box" magazine.

A 1500 round "box" magazine.

~ Teh Slapz

TaxiService wrote:OMG BARREL ROLL ON ACIDS
._. \·. |: /.· .-. ·.\.·/ ._. \·. |: /.· .-. ·.\
.·/ ._.
WHOOHHAGHGHHGEHGR
Who is online
Users browsing this forum: No registered users and 7 guests